Joined: Sep. 2002
||Posted: Nov. 29 2003,6:38 am
So, in case you havent already found out, to get the unit into software upload mode, with the unit powered off, press the following keys at the same time:
If you need to upload the Basemap as well, with the unit powered off, press:
A box with two "00" (zeros) will appear.
This is the hidden menu you may have heard people mention.
To get the unit into Basemap upload mode, using the up/down arrow keys, change the zeros to "98", then press enter.
Then use use the arrow keys to toggle up to "Basemap", then hit Enter.
You should get a message "UPLOADING TO BASEMAP".